Wheels

At the core of this all-around wheelset lies a modern, wide and light aluminum rim. Being the foundations of the wheel, it makes for a balanced width to stiffness to weight ratio. The rim is complemented by DT's proven pawl drive system and a high end build with bladed spokes and alloy nipples. These features make it a premium training wheel easily able to race your mates to the city limits sign. - Spline hub with 3-pawl system - Straight-pull hub and spokes are radial laced - Includes RWS Eco skewer, tubeless ready tape and tubeless valve

Elite Series skewers for fat bike applications AL6061 alloy lever with CrMo axle Available for 135mm, 150mm, 170mm, and 190mm OLD spacing

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. - End Cap Included

The SES 2.3 is purpose-built for the mountains. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires, the SES 2.3 raises the bar for performance through hilly and mountainous terrain. - Carbon fiber consctruction using continuously running fibers throughout the rim, tapering laminates, and removing excess material - 28mm front and 32mm rear rim depths provide crosswind stability and flatland aerodynamic efficiency to descend confidently and carry speed in the flat valleys between climbs - Hookless bead tubeless technology reduces weight, improves comfort, maintains strength, and ensures an exacting rim bead seat - Premium Road Hubs bring efficiency, longevity, and simplicity: Cold-forged and machined 6061 alloy for durable lightweight performance - Tubeless and disc brake only

Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready

Salsa's Stainless Flip-Offs use stainless steel rods for corrosion-resistant strength. They're strong, lightweight, and gorgeous. - Recommended for front rigid fork or full suspension use - Beautifully machined and hand friendly - Variety of sizes, sold as pairs or individually, front or rear - Black, Silver, Blue, Red, Green, Orange, Purple, or Pewter - More than just eye candy, they’re hand candy, as well - Weight: 49g

- The next generation in SPANK’s mountain bike rims with a built in vibration damping system. - Low sectional profile height and high width adds radial compliance while keeping high lateral stiffness and torsional strength. Features - Radially Compliant Gravity Rim with Vibrocore - Oohbah Inverted Inner Wall, BeadBite anti-burp - Optimized for DH, FR, and Heavy Enduro - Tubeless Ready

Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.

- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - 32 nipples weigh approximately 30 grams

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

At the core of this all-around wheelset lies a modern, wide and light aluminum rim. Being the foundations of the wheel, it makes for a balanced width to stiffness to weight ratio. The rim is complemented by DT's proven pawl drive system and a high end build with bladed spokes and alloy nipples. These features make it a premium training wheel easily able to race your mates to the city limits sign. - Spline hub - Straight-pull hub and spokes are radial laced - Includes RWS Eco skewer, tubeless ready tape and tubeless valve

The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface

The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life

- Full carbon fiber construction - 32mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals - Single spoke length for entire wheel - Hub and bearing system designed and validated for longevity, smoothness, low drag, and zero play - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - One length spoke used throughout wheelset (F&R)

Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place

The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available

- Straight gauge steel - Box of 100, includes 14g black brass nipples

Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings. All components are optimized for low friction and prolonged lifetime. This wheel kit is compatible with 1st generation non-disc Zipp NSW (before mid-2018). In The Box - 4 x 61803 bearings - 1 x 61903 bearing - 1 x 61804 bearing - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

- 42mm DEEP DISH sleeved and pinned rim - Powder coated (PC) or Anodized finish(Ano) dependent on color - Available with Machined or Non-Machined sidewall - 760g

Build your singlespeed or fixie bike around Surly's Ultra New Roadie Rear Hub. This gorgeous hunk of aluminum has the capability you need and reliable sealed bearings, too! It sports threads for a track cog and lockring on one side and a freewheel on the other so you can decide how you want to roll. Plus, this hub's 130mm width fits most road frames and the hollow chromoly axle provides a flex-free ride as well as simple quick release skewer compatibility.

Hope Pro2 Evo Freehub Bodies · Not compatible with Hope Pro2

- Aluminum hub body - Sealed bearings - 100mm OLD - 6-bolt disc rotor mount

• Aluminum hubs • Sealed bearings • 1-speed freewheel threading • 32-hole spoke drilling • Bolt-on 3/8-inch axle • 135mm hub spacing • Black or silver

- Forged alloy construction - Sealed Cartridge bearings - Double contact seals - 6-bolt disc - 12x142mm rear spacing - Aluminum hub body

- Aluminum hub body - Sealed bearings - 6-bolt disc rotor mount - 15mm thru axle - 78 x 15mm version: flush axle, no end caps

- Forged aluminum construction - Sealed Cartridge bearings - Double contact seals - 6-bolt disc rotor compatible - 8/10-speed cassette compatibility - Quick-release - 135mm hub spacing

- Unidirectional Toray T700 carbon fiber construction - Available in multiple widths for Cross Country, All Mountain, and Downhill applications - Reinforced nipple bed with directional drilling - Hookless bead design - Tubeless ready - Disc brake only - ISO-Mountain certified - ISO: 584 - Wall: Dbl - Side: Disc - Valve: PV - Tire Compatibility: Tubeless Compatible All Mountain: - Profile: 29 - Width ID: 27 - Width OD: 32 - Weight: 410g - ERD: 541 Downhill: - Width ID: 32 - Width OD: 37 - Profile: 31 - Weight: 450g - ERD: 545 Cross Country: - Width ID: 24 - Width OD: 30 - Profile: 26 - Weight: 370g - ERD: 550

276mm Straight-Pull External for Roam 30 27.5 Wheels, 3-pack.

- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap