Skip to main content

Bike Fitting

Improve Your Comfort & Performance

Regardless of what type of cycling you enjoy, you'll benefit from a bike that has been properly adjusted to fit your body and your riding style. Hypercat's Philip Casanta, a highly regarded in the cycling industry as a top bike certified fit specialist, will discuss your cycling history and goals. He'll then work with you to determine your ideal riding position.

With a professional bike fit, you can be more comfortable, more efficient, and more powerful on every ride. You’ll also be less likely to sustain injuries on a bike that has been expertly configured to meet your needs. 

Retul Fit bike fitting service

Retül Fit + Expert Fitter = Comfort & Results

Hypercat Cycleworks is proud to utilize Retül Fit, one of the most technically advanced bike fitting systems available today as a tool in our bike fitting sessions. Retül Fit is a bike fit measuring system that uses motion capture technology to accurately measure every movement within a millimeter.

Learn the root cause of your aches and pains, and how a proper fit will help you achieve your cycling goals while alleviating those pain points.

The data collected during your fit, combined with his 30+ years of fitting experience, certified fit expert, Philip Casanta will adjust your current bike or help you explore others options. His attention to detail will give you a truly personal experience.
 
Philip is one of less than 50 "IBFI Level 4" certified bike fitters in the world.
The International Institute of Bicycle Fitting sets the global standard for bike fitting. IBFI Certification level 4 is reserved for the best educated and most-experienced fitters. Level 4 Certification is achieved by accruing a minimum experience of 2400 fits, in addition to other qualifications, and reflects the highest level of understanding and knowledge.


Bike Fit Options

Whether you’re on a brand new bike or you’re looking to get more comfortable or shave seconds off of your next race time, you can benefit from a professional bike fit. Learn more about our fit services and schedule your appointment today.

Pre-Purchase Sizing

$150-$200

Are you considering a new bike or comprehensive component changes? Get dialed in using our custom Exit-Cycle Sizing Cycle. No bike necessary.

The most common applications for a Sizing Cycle fit:

Determine your proper bike size

Determine your precise fit coordinates/measurements to transfer to any bike

Testing components/parts including saddles or aerobars

Note: The first hour of your Sizing Cycle Fit is applied/credited towards a complete final fitting on your new bike.

Pricing info:
$150 for a Road/Gravel Pre-purchase sizing session

$200 for Triathlon/TT Pre-purchase sizing session

Retul Digitization

$50

Retul Digitization of Bicycle
(Zin - Computer Scan)

The Zin (Retul's handheld digitizer) provides the ability to measure a rider's bike at either 13 or 15 points, depending on the bike (road, aero, mountain, etc.) The Zin can measure fixed points, contours, and curves, providing a complete digital map of the bike that is far more accurate than traditional tape measures.

Even difficult components such as saddles and grips are measured for exact angles and relative positioning.

Avoid losing your favorite bike position again when you travel, take your bike in for service or change your saddle.

3D Dynamic Fit

$225 to $500

Complete and comprehensive fitting utilizing Retul motion capture. Includes consultation, physical bio-mechanical assessment, left and right side analysis, cleat adjustment, mechanical positioning, equipment recommendation, 3D bike measurement and PDF archiving of all data (as appropriate to individual rider).

3D fits are performed on road, gravel, mountain, triathlon, time trial, touring, cyclocross, track and tandem bicycles. 

2nd Bike - Save money by fitting two bikes in the same session. Same rider / same session. Choose and schedule the time slot following your primary appointment. Fittings will be performed back to back. 

Saddle Fitting

$75

Are you experiencing discomfort with your current saddle? Planning to buy a new saddle? Use our Sizing Cycle or your own bike to test different saddles before you buy.

Buy a saddle from Hypercat and $25 is applied toward your saddle purchase.

Demo saddles are also available for outside testing pre-purchase.

Laser Cleat Fitting

$75

Determine your proper cleat position. (This service is included in 3D dynamic bike fitting session). Adjust for varus/valgus, install cleats, wedges, shims, spacers and/or insoles if appropriate.  

This service is for clients with a good fit and are swapping shoes and/or pedals or having some minor cleat position issues.  

Knees, foot or hip pains represent bigger issues and need to be addressed during a proper fitting session. 

Please do not book this service if you have knee, foot or hip pains. 

Note: Price does not include parts. It is also highly recommended to have your bike digitized after having cleats installed/positioned to note saddle height and bike position.  

Follow-ups

$75

Follow-up appointments are used for equipment changes, minor adjustments, setting up a new bike, small tweaks and cleat readjustment.

30 days post initial fit are no charge. 31+ days is $50 per 30 minutes or TBD by fitter.

Schedule your bike fit today! Use our online booking system! =>

If the Shoe Fits

For maximum power transfer on the road or trail and for exceptional comfort on a spin bike, we recommend clipless cycling shoes and pedals. With stiffer soles and the ability to click into and out of your pedal system easily, cycling shoes make your ride and your workout more efficient, more effective, and more comfortable. Never get stuck in a toe cage again!