Wheels

Versatility is the name of the game with AR25. Want to run road tires for the Wednesday night group ride? Sure. Cyclocross rubber for the weekend's races? Absolutely. Thinking of checking out that new route with some 40's? Ride on…AR25 is intended to be used on all road surfaces—tarmac to gravel. Every road on the map is fair game when you're riding AR25.

Confident and capable of cleaning the A-line yet budget-friendly to save up for a season of bucket-list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. - High-load sealed cartridge bearings - Classic j-bend spokes - Robust protection system using a labyrinth radial lip seal and endcap proximity seals unencumbered by bearing wear or preload - CNC machined, anodized, and assembled entirely in Asheville, NC - Unified service parts across the range

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - 32 nipples weigh approximately 30 grams

The Deadbolt Thru-Axles feature the classic-looking Salsa lever and can be adjusted to return to the desired position when properly tightened. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications

- Longer skewers fit modern frames/forks with thicker dropouts - Aluminum lever/nut, Delrin pivot washer, serrated alloy nut with Nylock - White skewers are powder-coated - Shaft: chromoly - Wheel: front/rear - Spacing (front/rear): 100/135mm - Weight: 112g/set

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. This axle will replace the R.A.T. axle found on all Cervelo R.A.T. equipped bikes. In addition to this axle, we include our replacement derailleur hanger with traditional threads. This axle combined with the replacement derailleur hanger will provide a complete threaded thru-axle system. Our derailleur hanger matches the geometry and construction of the stock derailleur hanger in every way for crisp shifting performance. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

- Standard skewers fit either 130 or 135mm spaced hubs, unless listed as another length (i.e. 170mm) - 6061 machined lever with stainless steel pivot and laser-etched logo - All shafts are 5mm in diameter

The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available

Optimize your Zipp wheels with CeramicSpeed Hub Bearings to benefit from reduced friction and increased performance. The result is higher speed with the same effort as well as a higher top speed. CeramicSpeed Wheel Bearings have a proven lifetime, which is 3-5 times longer than standard bearings. All components are optimized for low friction and prolonged lifetime. This wheel kit is compatible with 1st generation non-disc Zipp NSW (before mid-2018). In The Box - 4 x 61803 bearings - 1 x 61903 bearing - 1 x 61804 bearing - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

- Axle/Spacing: 10/14 x 135mm bolt-on - 14mm adapters included - Micro-drive cassette rear hub for singlespeed and dirt jump - International Standard 6-bolt disc rotor mount - Bushed driver for greater durability over cartridge bearings (bearings have to be smaller for micro-drive, thus prone to higher loads) - Forged 6061 aluminum shell, 2 main body sealed cartridge bearings - CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame) - 12mm thru-axle conversion for DJD-BD available separately - No cog included - 9/10/11/13/16t mini sprockets available separately

- Proof that white powdercoated spokes don't have to cost a fortune - Straight gauge steel, durable coating resists scratches - Box of 100, includes 14g black brass nipples

- Straight gauge steel - Box of 100, includes 14g black brass nipples

- Precision CNC machined 6061 aluminum axle nuts - Compare stock steel nuts at 44 grams versus alloy nuts at 16 grams

- Aluminum hub body - Sealed bearings - 6-bolt disc rotor mount - 15mm (See MT-3100) or 20mm thru-axle - 32 or 36-hole spoke drilling

- Elite Series convertible cyclocross/gravel hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Use: Front Hub - Bearing: Sealed - Drilling: 28H - Material: AL6061 - Color: Blk - Brake Type: 6B - OLD: 100mm J-Bend Spoke: - PCD-L: 58mm - PCD-R: 45mm - LTF-L: 27.65mm - LTF-R: 15.35mm - CTF-L: 22.35mm - CTF-R: 34.65mm Straight Pull Spoke: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 31.4mm - LTF-R: 19.6mm - CTF-L: 18.6mm - CTF-R: 30.4mm

- Elite Series convertible fat bike hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement - J-bend spoke compatible - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 - Color: Blk - Brake Type: 6B - PCD-L: 58mm - PCD-R: 58mm Quick-Release: - LTF-L: 48.65mm - LTF-R: 48.65mm - CTF-L: 36.5mm - CTF-R: 36.5mm 12mm Thru-Axle: - LTF-L: 52.15mm - LTF-R: 52.15mm - CTF-L: 46.5mm - CTF-R: 46.5mm

- Axle adapters for RD-1110 Elite Series front road disc hubs - Available in standard QR, 12mm, and 15mm thru-axle options

- Unidirectional Toray T700 carbon fiber construction - Available in multiple widths for Cross Country, All Mountain, and Downhill applicarions - Reinforced nipple bed with directional drilling - Hookless bead design - Tubeless ready - Disc brake only - ISO-Mountain certified - ISO: 622 - Wall: Dbl - Side: Disc - Valve: PV - Tire Compatibility: Tubeless Compatible All Mountain: - Width ID: 27 - Width OD: 32 - Profile: 29 - Weight: 440g - ERD: 578 Downhill: - Width ID: 32 - Width OD: 38 - Profile: 31 - Weight: 500 - ERD: 584 Cross Country: - Width ID: 24 - Width OD: 30 - Profile: 26 - Weight: 390g - ERD: 587

- Aluminum hubs - Loose ball - Bolt-on - Axle: B/O 3/8 - Material: Aly - Color: Blk - Brake Type: 6B - OLD: 170mm

- Replacement end caps for MT-4100 hubs

- Unidirectional Toray T700 carbon fiber construction - Available in multiple widths for Cross Country, All Mountain, and Downhill applications - Reinforced nipple bed with directional drilling - Hookless bead design - Tubeless ready - Disc brake only - ISO-Mountain certified - ISO: 584 - Wall: Dbl - Side: Disc - Valve: PV - Tire Compatibility: Tubeless Compatible All Mountain: - Profile: 29 - Width ID: 27 - Width OD: 32 - Weight: 410g - ERD: 541 Downhill: - Width ID: 32 - Width OD: 37 - Profile: 31 - Weight: 450g - ERD: 545 Cross Country: - Width ID: 24 - Width OD: 30 - Profile: 26 - Weight: 370g - ERD: 550

- Axle adapters for CX/GX/MT/FB-1110 Elite Series front hubs - Available in standard QR, 12mm, 15mm, and 20mm thru-axle options - Material: Aly - Color: Blk

- Carbon rims available in two different profile heights featuring improved brake tracks - Toray T700 carbon in both Unidirectional and 3k carbon weaves for strength and integrity - Tubeless compatible rim bed with an 18mm internal width supports wider modern road tires Specs: - ISO: 622 - Width ID: 18 - Width OD: 25 - Wall: Dbl - Side: MSW - Valve: PV - Tire Compatibility: Tubeless Compatible High Profile: - Profile: 50 - Weight: 500g - ERD: 545 Low Profile: - Profile: 38 - Weight: 470g - ERD: 569

- End cap for Origin8 MT-3200 hubs - Spacing / Axle: 148mm

- End cap adapters for Origin8 RD1120 series 11-speed road hubs

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/6-Bolt Disc: PCD-L: 36mm PCD-R: 36mm LTF-L: 27.75mm LTF-R: 15.25mm CTF-L: 22.25mm CTF-R: 34.75mm J-Bend Spoke/Centerlock Disc: PCD-L: 45mm PCD-R: 45mm LTF-L: 27.25mm LTF-R: 15.45mm CTF-L: 22.75mm CTF-R: 34.55mm

- Replacement axle sets for MT-1100 hubs - Axle: QR