Parts

- Integrated lower headset for 1.5" or tapered steerers - 36° x 45°

NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors: CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

RaceFace Crank Arm Fixing Bolts - M15

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Converts Schrader rims to Presta - Rubber - Sold individually

Replacement piston and seals for Hope disc brake calipers.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Type: Lock washer - Size: 1" Keyed

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Fittings for Jagwire hydraulic hose. - Compression bushings (olives) to install Jagwire hydraulic hose with Shimano disc brakes

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only