Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Indoor Cycling

Sunlite Toe Straps
$7.59
- Heavy-duty nylon toe straps with classic style steel buckles - Narrow design fits most cage style pedals - 460mm length
Sunlite FlatForm II Exerciser Pedal Straps
$9.09
Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm
Tacx Quick Release for Rear Wheel
$11.99
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.
Tacx Roller Drive Belt
$11.99
Replacement roller belt for Tacs roller trainers.
Minoura LW-STD Clamp
$12.99
Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura. - Alloy clamp for mounting your own device on handlebar or stem - Lightweight and rustproof aluminum construction - Hex wrench required for instillation and removal - Clamp body has (1) M5 Thread hold in center - 22.2 mm-28.6 mm diameter range
Tacx Towel
$13.99
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions. - Highly absorbent - Measures 30cm x 115cm
Kinetic Skewer
$14.99
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Tacx Axle Nuts
$19.99
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
Saris Mag+ Shifter
$29.99
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
Saris Trainer Clutch Knob Upgrade/Replacement Kit
$29.99
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
Tacx E-Thru Trainer Axle
$29.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Tacx Skyliner
$29.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
Minoura TPH-1 Tablet Holder Mount for Bicycles
$37.99
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike
Elite SU-STA Front Wheel Support
$39.99
This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly - Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6% - Anti-slip rubber feet eliminate handlebar vibrations - Internal design that guarantees maximum wheel stability - Suitable for both road and MTB - You can attach to the trainer frame when not in use for easy transport and storage
Saris ANT+ USB Adapter for PC
$39.99
Connect your PC to CycleOps VirtualTraining.
Tacx Sweat Cover for Smartphones
$39.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
Wahoo RPM Cadence Sensor (BT/ANT+)
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Elite Thru Axle Adapter
$44.99
The Elite Thru Axle adapter kit makes Elite trainers compatible with bicycles with 10mm to 12mm diameter through bolts on the rear wheel (lengths from 130mm to 148mm boost). Easy to set up to start right away with your training, this Thru Axle adapter is made from quality material to ensure an immediate setup and great protection to the threads of your bicycle frame. This unit does it all!
Robert Axle Project Trainer Thru Axle
$53.99 - $54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Robert Axle Project Trainer Thru Axle for Surly MDS/Gnot-Boost
$54.00
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Tacx ANT+ Dongle Micro USB
$54.99
With this Tacx wireless ANT+ receiver for Android devices with a micro USB port, you can connect to devices that communicate via ANT+. For example a heart rate meter, speed and cadence sensor, sports watch, GPS device or bike computer. This enables you to keep track of your performance continually. It also allows you to link an ANT+ trainer to the Tacx Cycling app (tablet) or Tacx Training app (smartphone), or connect an older model Tacx trainer which only has ANT+ to your telephone, so you can train with the Tacx Training app and Tacx Cloud. The device you want to connect must have a micro USB port and Android 4.3 or higher. This ANT+ dongle is only compatible with devices that have USB On-The-Go.
Elite Folding Trainer Mat
$59.99
The Elite Folding Mat increases the comfort of your home cycling setup while protecting the surfaces you train on every day. It's easy to use, store, and transport and can be stored everywhere in your house. Dimensions: 1.8m x .9m
Elite Protec Plus
$59.99
Protects the bicycle from sweat and avoids corrosions or rust. - Prevents an accumulation of sweat on the frame and components that would lead to corrosion or affect the finish - Sits above the top-tube and can be adjusted for different bicycles - Washing-machine friendly
Saris 142X12 Boost Thru Axle Adapter
$59.99
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
Saris 148x12 Trainer Thru Axle Adapter
$59.99
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
Tacx Trainer Adapter for X-12 Axle
$59.99
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
Robert Axle Project Trainer Thru Axle for Focus R.A.T. Bikes
$64.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is specific to bikes with Focus R.A.T. thru-axles and 12 x 142. Includes a replacement R.A.T. nut. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end, and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Saris 20/24-inch Wheel Adapter
$69.99
The Saris 20/24-inch Wheel Adapter allows you to use your BMX or recumbent bike with your trainer.
Tacx Direct Drive Quick Release with Adapter Set
$69.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
Tacx USB ANT+ Antenna
$69.99
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
Page 1 of 2 Next page