Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

$19.99
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
$19.99
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
$35.95
Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare. - Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle - Compatible with Garmin bike computers and Multisport Watches - Requires Versa Carbon Mount or Versa Aluminum Mount Telescoping Garmin-Specific Computer Mount - Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches. On-the-Go Computer Tilt Adjust - Avoid changing glare with a tilt mechanism for easy adjustments while you ride Arrives Fully Assembled - Few steps required to install and head out on your first ride - Weight: 1.9oz (54g) - Construction: Nylon Composite Includes - Fully assembled computer mount - 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates Warranty: Limited Lifetime
$119.99
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
$58.99
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
$59.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
$15.99
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
$21.00
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
$9.99
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$7.99
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle
$14.99
Mounting for Shimano Di2
$59.99
Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Garmin 820, 520, 510, 500, 25, 20 - Fits Handlebars: 31.8MM - NOT GoPro Compatible - Anodized Color: Black, Red, Blue, Red/Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
$64.99
The K-EDGE Garmin TT Mount is the most advanced Time Trial and Triathlon computer mount available. Featuring a twist-lock mechanism to lock your Garmin with confidence. The K-EDGE Garmin TT Mount’s aluminum design and its unique locking feature is by far the most advanced mount on the market. With traditional TT mounts for the Garmin computer, you have to either have enough room between the extensions to perform the ¼ turn “twist” or the computer has to be mounted above the extensions. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility – 22.2mm diameter TT Extensions - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520*, 800, 1000, and Forerunner 310XT - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. *Garmin 520 is not compatible at this time.
$8.99
Garmin's set of Bike Cadence Sensor Replacement Bands fasten your Bike Cadence Sensor (sold separately) to any size crank arm.
$39.99
Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).
$9.99
Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.
$19.99
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to the seat post of a second bike with this quarter-turn mount. Includes mount and 2 fitting shims.
$19.99
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to an aero or round seat post with this quarter-turn mount. Includes mount, 2 fitting shims and 4 O-rings.
$29.99
The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap. Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth dongle for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
$3.99
Cadence Magnet for all CatEye computers that record cadence.
$5.95
The H-34 Flex-Tight Bracket is an OEM handlebar bracket so you can attach Cateye accessories. It fits all handlebars up to 32mm in diameter.
$5.99
Wheel magnet for all CatEye cycle computers
$75.00
**Only compatible with SL Sprint Stem (4 bolt)** Zipp’s QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes, system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. The Zipp QuickView Integrated mount will have two variants, one compatible with Service Course, Service Course SL, and SL Speed models, and another designed for use with the SL Sprint. This is an easy way to add elegant integration to your road bike. FEATURES -Computer compatibility: Garmin™, Wahoo™ -Accessory compatibility: GoPro™ -Lights: Niterider Lumina Series™ (with adapter), Light and Motion™, Bontrager™ (with adapter), Gloworm™ (with adapter), Lezyne™ (with adapter), Infini™ (with adapter), Sigma Sport™ -Lifetime warranty
$34.00
Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS
$16.95
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
$87.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)
$59.99
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
$24.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Page 1 of 6 Next page